Cascade Water Co. logoCascade Water Co. Water Filtration
Water testing & installation · Easton, MD

Clean water starts at home.

We test your water at your tap, recommend only what it needs, and our licensed plumbers install it in your home: whole-home filtration, reverse osmosis, softeners, and UV, for homes and businesses across Maryland.

  • Free in-home water test
  • Free professional installation
  • Lifetime warranty on tanks
  • Free in-home water testNo cost, no obligation
  • Free installationBy licensed & insured plumbers
  • Whole-home from $3,000Installation included
  • Locally ownedEaston, Talbot County

Filtration systems we install

Know your water

What's in your tap water?

Enter your ZIP code to see the contaminants your local water system reported in its published water quality report. Each result links to its source and shows the report year.

On a private well? There is no public report for wells. See what Maryland well owners commonly test for.

Our process

Three simple steps, and the first two are free.

No pressure and no surprises. Here’s exactly what happens from your first call to the day you’re enjoying better water.

  1. About an hour, at your home

    Free in-home water test

    Book online or give us a call. We come to you and test your water right at the tap, on city water or a private well.

    • Hardness, chlorine, TDS, pH, iron, and water pressure
    • We show you every reading as we take it
    • No cost and no obligation
    Filling a water bottle at a kitchen sink
  2. Same visit

    Clear, honest recommendation

    We explain what each number means for your family and your home, and recommend only what your water actually needs.

    • Plain language, no lab jargon
    • A written recommendation with clear pricing
    • If you don’t need much, we’ll tell you
    Homeowners reading over paperwork at their kitchen table
  3. About 4 hours for a whole-home system

    Professional installation

    If you go ahead, a licensed and insured professional plumber installs your system at no charge. We test it, show you how it works, and clean up after.

    • Free installation
    • Check-ins after your install
    • Backed by our limited warranty
    A plumber working on the plumbing under a sink
Start here

What brings you to Cascade?

Tell us where you are and we’ll point you the right way.

Cascade Water Co. otter mascot in a company cap and shirt, holding a water filter and a wrench

I'm on a private well

No one tests a private well for you. Start with a free in-home test and see what Maryland well owners commonly check for.

Well water guide

I'm on town or city water

Look up what your water system reported in its latest published report, then decide if you want extra filtration.

Look up my water

I already have a system

Questions about a filter, softener, or UV system you already own? Call us and we’ll take a look.

Contact us
See inside our systems

Filtration and treatment that fit your water.

Pick a system, then switch between the outside and a cut-away of what’s inside.

Whole-Home Filtration system from the outsideCut-away view of a whole-home filtration system showing the media inside
  • Activated carbon Holds onto chlorine and many chemicals
  • Gravel base Supports the carbon bed
Illustrative product render. Actual equipment and media depend on your water test.
How whole-home filtration works
Not just a box on your doorstep

We handle the whole job, start to finish.

You never have to figure out plumbing or parts yourself. We test, recommend, install, and stick around after.

  • In-home water test
  • System sized to your home
  • Installed by licensed, insured plumbers
  • Treated water tested before we leave
  • Warranty and follow-up service
Book my free water test
A mother and daughter smiling as they drink glasses of water in a bright kitchen
Health comes first

Start with the water your family drinks every day.

Many things that end up in water can't be seen, tasted, or smelled, so the only way to know what's in yours is to test it. Public water systems publish an annual Consumer Confidence Report on what they detected. Private well owners are responsible for testing their own water.

We look at your water first, then recommend treatment matched to what's actually there. You won't get a one-size-fits-all package.

  • Testing for city and well water
  • Recommendations tied to your results
  • Links to EPA, CDC, and WHO sources so you can read up yourself
Browse the contaminant library
Water problems we fix

You can usually see, taste, or smell the problem.

Here's what's usually behind the most common complaints, and the system that targets each one. Treated water is also easier on your pipes, water heater, and appliances.

Your free water test

We test it at your tap and explain every number.

No lab jargon. We show you each reading in person, tell you what it means for your family and your home, and only recommend what your water actually needs.

Hardness

How much calcium and magnesium is in your water.

Why it matters: The minerals behind spotty dishes, crusty faucets, stiff laundry, and scale inside your water heater.

Chlorine & chloramine

The disinfectant your water system adds.

Why it matters: What you taste and smell in a glass of tap water, and what you shower in every day.

Total dissolved solids (TDS)

Everything dissolved in your water, added up.

Why it matters: A quick read on overall water quality and how well a drinking-water system would help.

pH

Whether your water is acidic, neutral, or basic.

Why it matters: Acidic water can slowly eat at copper pipes and leave blue-green stains.

Iron

A natural metal common in Eastern Shore wells.

Why it matters: Behind orange-brown stains on sinks, tubs, toilets, and laundry.

Water pressure

How hard water pushes through your plumbing.

Why it matters: Pressure that runs too high strains pipes, valves, and appliances. Most plumbing codes call for a pressure-reducing valve above 80 psi.

Book my free water test No cost, no obligation.
No surprises

Install day, step by step.

  1. We protect your space

    Floor protection goes down and we confirm exactly where everything will go.

  2. Your system goes in

    A licensed, insured plumber installs your system with a bypass valve. A whole-home system with a softener takes about four hours.

  3. We test the treated water

    We run your water through the new system and test it again, so you can see the difference on the spot.

  4. We walk you through it

    How it works, what to expect, and the little bit of upkeep it needs. No guesswork.

  5. We leave it clean

    Your space is left as clean as we found it.

Who we serve

City water or well water. Homes or commercial buildings.

Municipal (city) water

City water is treated and regulated, but it can still carry disinfectant taste, hardness, and substances picked up on the way to your tap. We'll walk you through your system's latest report.

Private wells

Wells aren't covered by public water rules, so no one tests them for you. Common concerns in Maryland include bacteria, nitrates, iron, manganese, hardness, and naturally occurring elements like arsenic and radon.

Residential

Single-family homes of any size, townhouses, condos, and apartments, including point-of-use options for renters.

Commercial

Offices, restaurants, farms, and multi-unit buildings. We protect your equipment and give staff and customers better water.

Questions

Frequently asked questions

What does the free water test check?

Hardness, chlorine and chloramine, total dissolved solids, pH, iron, and your water pressure, among others. We go over every reading with you in person and explain what it means for your family and your home.

What happens on install day?

A licensed, insured plumber installs your system with a bypass valve. A whole-home system with a softener takes about four hours. We test the treated water, walk you through using the system, and leave your space as clean as we found it.

Is there a warranty?

Yes. Tanks and dry parts carry a lifetime warranty, with 5 years on the control valve and filtration media and 1 year on installation labor. We also offer service contracts for homes and businesses that would rather not maintain a system themselves.

How much does a water test cost?

It’s free. We test your water at your tap, explain the results in plain language, and there’s no obligation to buy anything.

Is installation really free?

Yes. You pay for the system you choose, and it’s installed at no charge. Whole-home systems start at $3,000. Every installation is done by licensed and insured professional plumbers. The free water test and quote form give you a rough price range up front.

Do you work on both city water and wells?

Yes. We treat municipal water and private wells, for homes of any size, townhouses, apartments, and commercial buildings across the Eastern Shore and Central Maryland.

Do I need a water softener?

Only if your water is hard. Easton Utilities’ latest report describes its water as soft, while many wells around the Shore are harder. A test tells you for sure.

Is my tap water safe?

Public water systems must meet federal standards and publish yearly reports on what they detect. You can look yours up on our contaminant page. Private wells aren’t regulated, so testing is the only way to know.

How do I take care of a system?

It depends on the system: adding salt to a softener, changing filter cartridges, or replacing a UV lamp yearly. We explain maintenance before you buy and remind you when it’s due.

Local to the Eastern Shore

Based in Easton. Serving Eastern Shore and Central Maryland.

We're a local Talbot County company. We work across the Eastern Shore and Central Maryland, from Shore towns on well water to public water systems around Annapolis and Baltimore County.

Find out what's in your water. It's free.

Book a free in-home water test, or call and talk to a real person in Easton.

Call nowFree water test